Witeg – SmartLab Gravity-Air Incubators (SWIG Series)

Ideal for:

  • microorganism culture, animal and plant cell culture, constant temperature, germination, etc.

Safety mechanism:

  • overheat and over-current protection
  • sensor error detection

Controller:

  • Smart-Lab™ controller with 4″ full touch screen TFT LCD:
    • WiRe™ app service, remote control system
    • variable program settings
    • self-diagnostic function
    • automatic data recording
    • data transfer to PC by USB memory
    • Internet connectivity with WiFi

Temperature uniformity successfully tested by ASTM standards: All incubators and ovens are thoroughly tested, using 12 temperature sensors and the latest instruments to obtain validation, which corresponds to international standards.

Green product: All incubators and ovens achieve minimum power consumption by using heating elements consuming minimum power adjusted for the capacity and temperature of the chamber.

Gravity-air: The incubators gravity-air flow is established by creating radiant and conductive heat on three sides of the chamber (bottom, left and right side).

Witeg – SmartLab Gravity-Air Incubators (SWIG Series)

Key Features

  • gravity-air flow by natural flow preventing cross-contamination of samples
  • temperature uniformity and accuracy by high performance 3-sided heating mechanism
  • 2x PE-coated steel wire shelves included
  • corrosion-resistant stainless steel chamber, powder-coated body
  • inner tempered glass door with silicone packing offers easy observation without door opening
  • ambient to 70°C of temperature range, fluctuation of ±0.2°Cat 37°C, ±0.3°C at 50°C
  • storage function for the set values of temperature and timer
  • alarm function: error status and timer end
  • backlight LCD display
  • CE & UL/CUL certified and unique serial number for tracing

SMART-LabTM Controller

  • full touch screen TFT LCD:
  • WiRe™ app service, remote control system
  • variable program settings
  • self-diagnosis and interactive temperature graph
  • automatic data recording and password protection
  • data transfer to PC by USB memory
  • digital calibration (offset function)
  • min-/max-temperature memory & program function
  • push-alarm service to smartphone or tablet PC

Specifications

Model SWIG-32 SWIG-50 SWIG-105 SWIG-115
Capacity 32L 50L 105L 155L
Temperature range & control resolution room temperature +5°C – +70°C, ±0.1°C
Temperature Fluctuation & sensor ±0.2°C at 37°C, ±0.3°C at 50°C, ΡΤ 100 sensor
Temperature variation ±0.6°C at 37°C, ±1.0°C at 50°C
Heater power 150 W 200 W 300 W 400 W
Heat-up time 25 min to 37°C, 40 min to 50°C 30 min to 37°C,
40 min to 50°C
Recovery time (door open 30sec) 8 min to 37°C, 12 min to 50°C 10 min to 37°C, 15 min to 50°C
Timer & alarm 99hr 59 min (delay & continuous run)
Shelves 2 x PE-coated steel wire shelves included, total load 32 kg (16 kg per shelf)
Ventilation hole 1 ventilation hole (inner 0 35 mm) with stainless steel cap
Internal dimensions (W x D x H, mm) 312 x 290 x 360 mm 370 x 350 x 420 mm 485 x 410 x 535 mm 550 x 475 x 600 mm
External dimensions (W x D x H, mm), net weight 458 x 477 x 624 mm, 32kg 518 x 537 x 701 mm, 40kg 635 x 595 x 841 mm, 59kg 700 x 660 x 906 mm, 71kg
Packing size & gross weight 568 x 592 x 698 mm, 39kg 628 x 652 x 775 mm, 53kg 731 x 710 x 1018 mm, 67kg 796 x 775 x 1083 mm, 78kg
Power supply 1 Phase AC 120V, 60 Hz or AC 230V, 50/60 Hz
Power consumption 159 W 169,9 W 292,9 W 420,5 W
Energy consumption  at 37°C/ at 50°C 34 Wh/ 81 Wh 41 Wh/103 Wh 63 Wh/ 152 Wh 99 Wh/ 212 Wh
Order number 230V DH.SWIG03032 DH.SWIG03050 DH.SWIG03105 DH.SWIG03155
Order number 120V DH.SWIG04032 DH.SWIG04050 DH.SWIG04105 DH.SWIG04155

* models not available in Europe

What’s included: Incubator SWIG, 2 PE-coated steel wire shelves, power cable, instruction manual

Scroll to Top